|
|
- Info
New items
-
Cutting tools for tool and mould making
A range of cutting tools that is especially adapted to the needs of tool and mould makers. Our high-quality milling cutters, drills, threading tools and reamers are immediately available from stock
more
-
E 2077 Pliers set for sealing plug E 2078
The E 2077 pliers set allows for an easy and fast insertion of the sealing plugs in the cooling bore holes.
more
-
NEW – Air-cushioned assembly table with CE Certificate
Our air-cushioned assembly table has been further upgraded and CE certified. It is suited for repair and assembly works on moulds and tools and provides unrestricted mobility of both mould halves, without any need to exert force
more
-
Complete range of erosion accessories
High-quality erosion accessories made of copper and spark erosion graphite in grades Q40, Q60 and Q70. Ready-made round, square and flat head and rod electrodes. Plane parallel special graphite plates in customized widths and lengths and in various standardised thicknesses
more
-
E 5120, E 5122, E 5124 – Sliding guide bushes
Optimum precision due to G4 tolerance of the inside diameter with sufficient guide clearance
more
-
Clamping rim of clamp risers / clamp plates
Clamping rim especially adapted for die sets ensures simple clamping of your tools inside the machine
more
-
E 1518 Threaded dowel for ejector set coupling
Ideal for a subsequent upgrade of already existing tools. The threaded dowel provides a fully standardized coupling solution for all moulds und matches our E 1804 ejector set coupling
more
-
Graphite cut to customized dimensions
Plane-parallel graphite plates cut to customized dimensions, available in standard thicknesses. All Meusburger graphites are specially designed for electrical discharge machining and available in grades Q40, Q60 and Q70. Width and length are freely selectable within certain size limits
more
-
E 5202 Ball cage with maximum number of balls
Ultimate precision due to optimum pre-load of the guide system
more
-
Sealing plugs M11x1
Our tested and proved sealing plugs E 2074, E 2075 and E 2080 now also available in dimension M11x1. Important saving of time and costs because the diameter 10 mm cooling hole corresponds to the pre-hole for the thread
more
-
CONSUMABLES
Meusburger offers a large range of high-quality consumables for all kinds of use in tool and mould making.
more
-
E 1145 Recirculating ball bushing for support pillar
The recirculating ball bushing for support pillar is adapted to our ejector plates. The space saving guide/support design boasts unlimited stroke length and ideal running behavior
more
-
E 1809 Claw puller
The inexpensive puller with four different release forces for stripper plates and triple plate tools. Simple and easy assembly and quick adaptability determined by standardized system pressure springs
more
-
NEW – E 2090 Swivel coupling 90° for cooling bridge
The swivel coupling 90° - the perfect device to make cooling bridges stable and compact. The push-in cooling tube enables easy-to-install deflection solutions with really short connecting pieces. Furthermore, the cooling bridge can be placed in a pocket, saving space
more
-
FW-Change Moulds
Meusburger change moulds are the ideal solution for the quick and cost saving making of prototypes or small series, offering a precise and strong construction.
more
-
E 1804 Ejector set coupling
With our newly developed ejector set coupling you minimize your machine standstill times through quick changes
more
-
Sealing plugs M9x1
Our tested and proved sealing plugs E 2074, E 2075 and E 2080 now also available in dimension M9x1. Important saving of time and costs because the diameter 8 mm cooling hole corresponds to the pre-hole for the thread
more
-
F 70 risers with thread included
The F 70 risers are manufactured with a centred thread for sizes with guide bore diameters 30, 42 and 54. This guarantees an easy and secure access of the ejector set along with substantial savings of time and costs
more
-
Blade ejector pins with corner radii
Highly precise blade ejector pins with 2 (E 1727) and 4 (E 1728) R 0.2 mm corner radii. These are especially suitable for wire cut openings and immediately available from stock in many different sizes
more
-
E 1673 ventilation valve, cylindrical, short
The design of the cylindrical ventilation valve, which serves the ventilation of the cavity during demoulding, enables simple and space-saving mounting of the part. The 1.4034 steel quality guarantees high wear resistance and ensures good polishability
more
-
E 3045, E 3047 and E 3049 Snap-in plates for slide stopper units
The snap-in plates for slide stopper units minimize wear and tear on the cavity plate and are especially recommended for unhardened plates. They fit all slide stopper units, also in our FB-split mould tools
more
-
Stainless steel devices for temperature regulation
High-quality products for temperature regulation made of 1.4305 stainless steel, ideal for use in cleanroom production areas. Fittings and couplers that are also available with shut-off function
more
-
E 1525 ejection stroke limiter
The E 1525 ejection stroke limiter serves the stroke limitation of single ejectors and ejector sets and enables two-stage ejection with just one ejector set. Perfectly combinable with the E 3250 and E 3252 ejection sliding units
more
-
E 1306 Fine centering unit
The high-quality E 1306 fine centering unit takes up little space and is therefore perfectly suitable for highly precise centering tasks in really small moulds and mould inserts. The W-C:H coating ensures excellent sliding properties and high wear resistance
more
-
Retainer bush without undercut
The retainer bush without undercut allows you to create an individual undercut, which in turn ensures a perfect match with the product and the production process
more
-
Drill bushes
High-quality drill bushes with and without collar, certified according to DIN/ISO and immediately available from stock in many dimensions
more
-
Tunnel gate inserts
Our trusted tunnel gate inserts are now also available in new, smaller sizes. These MIM-manufactured inserts ensure precise gates and an extremely high process reliability
more
-
E 3250 Ejection sliding unit
The E 3250 guided ejection sliding unit for inner undercuts is capable of overcoming long distances during demoulding despite its compact design; it is simply triggered by the ejector set
more
-
E 3252 Ejection slide for insert
The E3252 guided ejection slide for complicated inner undercuts with the corresponding E 3256 insert can be simply triggered by the ejector set
more
-
N 800 - Standard bars
N 800 standard bars made from stress relief annealed quality steel, now also offered in four additional steel qualities, available for immediate dispatch
more
-
Aluminium
F 50 cavity plates and P plates made of high-strength 3.4365 (AW-7075) aluminium, perfectly adequate for use in tool and mould making
more
-
Recirculating ball bushing for ejector set
Precise recirculating ball bushings (E 1144), available from stock, applicable for guiding ejector sets, enabling unlimited strokes
more
-
Two-stage single-stroke ejector
With the two-stage single-stroke ejector E 1865 ejector plates can be moved separately from each other
more
-
Wear plate with oil groove
Comprehensive range of wear plates with oil groove (E 3036), which can be used for different mounting angles
more
-
Ejector pins cut to length
Ejector pins precisely cut to length. Order now - enjoy prompt delivery
more
-
Ancillaries for temperature regulation
Comprehensive range of ancillaries for temperature regulation (USA system) in all current dimensions now available from stock – an alternative to Meusburger’s well-established temperature regulating products
more
-
Support pillar with guiding function
Save valuable space in the ejector set by simply combining the guiding and the supporting function
more
-
Contour core pins
Precise, through-hardened contour core pins made of cold-work and hot-work steel available in many dimensions, featuring twist protection at the head
more
|
|
Cutting tools for tool and mould makingA range of cutting tools that is especially adapted to the needs of tool and mould makers. Our high-quality milling cutters, drills, threading tools and reamers are immediately available from stockmore
E 2077 Pliers set for sealing plug E 2078The E 2077 pliers set allows for an easy and fast insertion of the sealing plugs in the cooling bore holes.more
NEW – Air-cushioned assembly table with CE CertificateOur air-cushioned assembly table has been further upgraded and CE certified. It is suited for repair and assembly works on moulds and tools and provides unrestricted mobility of both mould halves, without any need to exert forcemore
Complete range of erosion accessoriesHigh-quality erosion accessories made of copper and spark erosion graphite in grades Q40, Q60 and Q70. Ready-made round, square and flat head and rod electrodes. Plane parallel special graphite plates in customized widths and lengths and in various standardised thicknessesmore
E 5120, E 5122, E 5124 – Sliding guide bushesOptimum precision due to G4 tolerance of the inside diameter with sufficient guide clearancemore
Clamping rim of clamp risers / clamp platesClamping rim especially adapted for die sets ensures simple clamping of your tools inside the machinemore
E 1518 Threaded dowel for ejector set couplingIdeal for a subsequent upgrade of already existing tools. The threaded dowel provides a fully standardized coupling solution for all moulds und matches our E 1804 ejector set couplingmore
Graphite cut to customized dimensionsPlane-parallel graphite plates cut to customized dimensions, available in standard thicknesses. All Meusburger graphites are specially designed for electrical discharge machining and available in grades Q40, Q60 and Q70. Width and length are freely selectable within certain size limitsmore
E 5202 Ball cage with maximum number of ballsUltimate precision due to optimum pre-load of the guide systemmore
Sealing plugs M11x1Our tested and proved sealing plugs E 2074, E 2075 and E 2080 now also available in dimension M11x1. Important saving of time and costs because the diameter 10 mm cooling hole corresponds to the pre-hole for the threadmore
CONSUMABLESMeusburger offers a large range of high-quality consumables for all kinds of use in tool and mould making.more
E 1145 Recirculating ball bushing for support pillarThe recirculating ball bushing for support pillar is adapted to our ejector plates. The space saving guide/support design boasts unlimited stroke length and ideal running behaviormore
E 1809 Claw pullerThe inexpensive puller with four different release forces for stripper plates and triple plate tools. Simple and easy assembly and quick adaptability determined by standardized system pressure springsmore
NEW – E 2090 Swivel coupling 90° for cooling bridgeThe swivel coupling 90° - the perfect device to make cooling bridges stable and compact. The push-in cooling tube enables easy-to-install deflection solutions with really short connecting pieces. Furthermore, the cooling bridge can be placed in a pocket, saving spacemore
FW-Change MouldsMeusburger change moulds are the ideal solution for the quick and cost saving making of prototypes or small series, offering a precise and strong construction.more
E 1804 Ejector set couplingWith our newly developed ejector set coupling you minimize your machine standstill times through quick changesmore
Sealing plugs M9x1Our tested and proved sealing plugs E 2074, E 2075 and E 2080 now also available in dimension M9x1. Important saving of time and costs because the diameter 8 mm cooling hole corresponds to the pre-hole for the threadmore
F 70 risers with thread includedThe F 70 risers are manufactured with a centred thread for sizes with guide bore diameters 30, 42 and 54. This guarantees an easy and secure access of the ejector set along with substantial savings of time and costsmore
Blade ejector pins with corner radiiHighly precise blade ejector pins with 2 (E 1727) and 4 (E 1728) R 0.2 mm corner radii. These are especially suitable for wire cut openings and immediately available from stock in many different sizesmore
E 1673 ventilation valve, cylindrical, shortThe design of the cylindrical ventilation valve, which serves the ventilation of the cavity during demoulding, enables simple and space-saving mounting of the part. The 1.4034 steel quality guarantees high wear resistance and ensures good polishabilitymore
E 3045, E 3047 and E 3049 Snap-in plates for slide stopper unitsThe snap-in plates for slide stopper units minimize wear and tear on the cavity plate and are especially recommended for unhardened plates. They fit all slide stopper units, also in our FB-split mould toolsmore
Stainless steel devices for temperature regulationHigh-quality products for temperature regulation made of 1.4305 stainless steel, ideal for use in cleanroom production areas. Fittings and couplers that are also available with shut-off functionmore
E 1525 ejection stroke limiterThe E 1525 ejection stroke limiter serves the stroke limitation of single ejectors and ejector sets and enables two-stage ejection with just one ejector set. Perfectly combinable with the E 3250 and E 3252 ejection sliding unitsmore
E 1306 Fine centering unitThe high-quality E 1306 fine centering unit takes up little space and is therefore perfectly suitable for highly precise centering tasks in really small moulds and mould inserts. The W-C:H coating ensures excellent sliding properties and high wear resistancemore
Retainer bush without undercutThe retainer bush without undercut allows you to create an individual undercut, which in turn ensures a perfect match with the product and the production processmore
Drill bushesHigh-quality drill bushes with and without collar, certified according to DIN/ISO and immediately available from stock in many dimensionsmore
Tunnel gate insertsOur trusted tunnel gate inserts are now also available in new, smaller sizes. These MIM-manufactured inserts ensure precise gates and an extremely high process reliabilitymore
E 3250 Ejection sliding unitThe E 3250 guided ejection sliding unit for inner undercuts is capable of overcoming long distances during demoulding despite its compact design; it is simply triggered by the ejector setmore
E 3252 Ejection slide for insertThe E3252 guided ejection slide for complicated inner undercuts with the corresponding E 3256 insert can be simply triggered by the ejector setmore
N 800 - Standard barsN 800 standard bars made from stress relief annealed quality steel, now also offered in four additional steel qualities, available for immediate dispatchmore
AluminiumF 50 cavity plates and P plates made of high-strength 3.4365 (AW-7075) aluminium, perfectly adequate for use in tool and mould makingmore
Recirculating ball bushing for ejector setPrecise recirculating ball bushings (E 1144), available from stock, applicable for guiding ejector sets, enabling unlimited strokesmore
Two-stage single-stroke ejectorWith the two-stage single-stroke ejector E 1865 ejector plates can be moved separately from each othermore
Wear plate with oil grooveComprehensive range of wear plates with oil groove (E 3036), which can be used for different mounting anglesmore
Ejector pins cut to lengthEjector pins precisely cut to length. Order now - enjoy prompt deliverymore
Ancillaries for temperature regulationComprehensive range of ancillaries for temperature regulation (USA system) in all current dimensions now available from stock – an alternative to Meusburger’s well-established temperature regulating productsmore
Support pillar with guiding functionSave valuable space in the ejector set by simply combining the guiding and the supporting functionmore
Contour core pinsPrecise, through-hardened contour core pins made of cold-work and hot-work steel available in many dimensions, featuring twist protection at the headmore
